*** OUT OF STOCK IN USA ***

*** IN STOCK IN CHINA ***

*** For orders outside the USA, check at info@coollights.biz for shipping quotes and immediate ordering direct from China to you ***

CL-LED256 is the perfect, small compliment in an all LED kit. Available in 3200K or 5600K spot only configurations (2 models to choose from in the drop down box below). Great for back / hair / rim / accent lighting particularly when you feel the LED 600 is a bit too much for that use. The fixture includes removable barndoors and an accessory slide for future accessories like the included filter panel set.

The LED 256 also includes a photographic standard 1/4-20 threaded hole on the bottom to allow the use of a wide range of mounts from our included angle adjustable, baby 5/8" (16mm) stand adapter to something like an articulating arm (available from other vendors). In addition to all this, there is an acrylic filter panel set included for those times correction is necessary (1/4 minus green, 1/2 minus green, full CTO and diffusion).

Includes: LED 256 fixture, removable barndoors, acrylic filter panel set, 9VDC power supply, 16 foot long IEC power cord, 1 battery plate of your choice, stand adapter and nylon carrying case.

Download the CL-LED256 product operation manual here.

Normally $429

Special Limited Time Promotion Price $299. (Shipping extra and sales tax may apply).

*Be sure to choose your color temperature and free battery plate configuration in the drop down boxes below BEFORE adding to cart.

Photometrics:

Specifications:

Dimensions: 5" x 5" x 3.25"
Weight: 1 lb. 15 oz.
Construction: Powder coated (black) aluminum
LED Type: 5mm Round LEDs in 3200K or 5600K versions
LED Beam Angle: 40 degree for "spot"
LED CRI:
- 5600K Spot: 80 CRI
- 3200K Spot: 85 CRI
Voltage Input: 6 VDC to 18 VDC through industry standard 4 pin XLR input plug
Current: 2.75 amps nominal at 9 VDC (25 watts)
Power Supply: 9VDC with IEC plug adapter and 4 pin female XLR DC output--includes carabiner attachment to hang power supply on light stand. Universal voltage input 100 to 240VAC 50 / 60 hz
Battery Adaptation: Included battery mount plate in your choice of one of the following: Sony NP-F970 or Panasonic D54S small camcorder batteries
Barndoors: Removable from slide in accessory holder
Stand Adapter: Angle adjustable baby 5/8" stand adapter with 1/4-20 fitting to bottom of fixture
Dimming: Yes continuously adjustable via dimmer dial
Bank Select: 3 bank select switches controlling LED column on/off with Master switch as well
Carrying Case: Black nylon padded case included

Above is a picture of the back of the fixture showing the one of the available battery plates, bank select switches, master switch and the ball joint angle adjustable, baby stand adapter.

Below is the back of the panel with a Sony NP-F970 camcorder battery attached with our supplied Sony plate (batteries not supplied by Cool Lights).

Here is a shot of the included filter panel set: 1/4 minus green, 1/2 minus green, full CTO and diffusion all in a convenient nylon pouch..