Our 2x55 watt universal voltage electronic ballast is the perfect complement to any DIY 55w biax tube system. While this ballast isn't a name brand, we have been using them with great results for over 2 years and like the reliability. Specs are identical to the Sylvania ballast we have carried in the past! Since they are universal voltage, they work on any input line voltage between 100v and 277v 50 / 60hz. Silent and flicker free. This is the non-dimming version. Each of these drives 1 or 2 tubes depending on your needs. Wiring diagram enclosed on the top label of the ballast itself.

Below you will find a wiring diagram for this ballast using two of our 2G11 sockets.

*Image courtesy Niedorf Photography

Specifications

CL-SE255
Dimming: No
Starting Method: Programmed Start
Output Frequency: 40Khz
Power Factor: .98
Number of Lamps Driven: 1 or 2
Input Watts: 118w
Input Voltage: 100 to 277v 50/60hz
UL Listed Class P, Type 1, Outdoor Type CC
Class A Sound Rating
FCC 47CFR Part 18 Non-Consumer
Dynamic End of Lamp Sensing
Remote Mounting up to 18 feet

Physical:

Dimensions: 16.73" L x 1.18" W x .87" H (425mm L x 30mm W x 22mm H)
Mounting Hole Distance: 16.34" (415mm)
Weight: .88lbs.
Number of input leads: 2 (line and neutral) ground to case
Number of output leads: 6 (2 red, 2 blue, 2 yellow)
Connectors: Push-in Lock Type
Recommended Wire Type: Use 18g 600v rated solid core copper wire only